| |
| What
floor height is available from the standard Civik Zinc Spiral kit?
The
standard Civik Zinc kit of 13 risers will fit a floor to floor height of
up to 2.86m (9' 4") whilst complying with the UK Building
Regulations. Our regs require a maximum individual tread rise
of 22cm; however, the staircase is made in Italy and can be
installed with a tread rise of up to 23.5m to comply with
regulations in the rest of Europe. It is important that you
are aware of this when looking at details for the Italian staircases
in the brochure and on other websites. We are always happy to
advise on the options for your project. |
|
| |
| What
if my floor height is lower or higher than the standard kit height?
If you have a lower
floor to floor height, you will probably just use less of the treads
supplied in the kit, plus you may need some additional components
and we would always be happy to advise you on this. If you
floor height is greater, then we can supply additional tread kits
and you'll find more details on the accessories
page.
There is a maximum floor height available for the Civik Zinc of
3.76m. |
| |
| Can
I use the Civik Zinc inside my house?
The Civik Zinc Spiral
staircase is made specifically for exterior use. It has been
treated with a process including, pickling, zinc bath and an
antioxidant protection primer. The galvanised finish may have
some imperfections which can be remedied by gentle filing and
repainting with the zinc paint included in the kit. However,
the treads are drilled for drainage and non-slip treatment and as
such they are not suitable for using inside your house.
|
| |
| Is
it possible to connect the Civik Zinc handrailing to some balustrading on
my top landing?
No. Arkč do
not provide matching galvanised balustrading. |
| |
| Do
I need to specify whether my Civik Zinc Spiral needs to turn to the
left or right before I order?
No. The Civik
Zinc Spiral kit can be installed in a clockwise or anti-clockwise ascent
at the time of installation.
|
| |
| How
big is the
landing tread?
The landing tread for the Civik
spirals are shown below.
|
| |
| What
is the size of the base plate on the Civik Zinc Spiral?
The base plate
measures 24cm diameter, including the cover plate. |
| |
| If
you have any other questions you would like to ask about the Civik
Zinc Spiral, please email us on info@stairsolutions.co.uk
or ring, fax or post us a letter. We're always happy to help! |
